Hub Puller to suit Rudge Whitworth wire wheel hubs.- Type 42 8 TPI (K021/8)
BRITISH MANUFACTURE BY ORSON
Universal tool which will serve both Left hand and Right- hand side of the vehicle.
This will fit cars which have a Type 42 wheel and an 8 TPI (threads per inch) pattern.
This will fit Morgan, Triumph, Bugatti, Ferrari.
It will fit some MG (check for thread pattern? some have 12 TPI), Austin Healey, again some have 12 TPI please check.
The part is manufactured from high strength steel with further heat treatment. Supplied with a bolt of toughened steel. The tool is dual threaded with a left hand and right hand 8TPI thread. Simply remove the bolt and swap to the other side. Comes with tommy bar holes to ensure tight hand fit on the hub.
Simple to use. Remove spinner, wheel and hub. Locate the puller on the correct side and thread down as far as possible by hand – nip tight with tommy bar. Apply the bolt with spanner or socket.
Tighten bolt on regular intervals and the shaft will be removed. Applying penetrating oil may aid the process.
Great Tool for the garage or individual car enthusiast.