Premium manufacturer and supplier of Rudge Whitworth splined hubs and knock off spinners for a wide range of Classic Marques
CTL Trading as Orson Equipment manufactures sells automobile / car parts which are intended to be compatible with some makes and models of cars, but which are not authorised or licensed by any particular car manufacturer.
Unless otherwise stated, the parts sold by CTL Trading as Orson Equipment are aftermarket and are not genuine or manufacturer approved, and CTL Trading as Orson Equipment has no association with any car manufacturer.
ORSON HUB PULLER TOOL
Hub Puller to suit Rudge Whitworth wire wheel hubs. BRITISH MANUFACTURE BY ORSON
The part is manufactured from high strength steel. Supplied with a bolt of toughened steel. The tool is dual threaded with a left hand and right hand 8TPI or 12 TPI thread. Simply remove the bolt and swap to the other side. Comes with tommy bar holes to ensure tight hand fit on the hub.
Simple to use. Remove spinner, wheel and hub. Locate the puller on the correct side and thread down as far as possible by hand – nip tight with tommy bar. Apply the bolt with spanner or socket.
Tighten bolt on regular intervals and the shaft will be removed. Applying penetrating oil may aid the process.
Click on link Below to establish which tool suits your vehicle.
HUB PULLER 42 TYPE 8TPI
Type 42 8 TPI (K021/8) – Website Price £136.25 +Shipping + VAT
Universal tool which will serve both Left hand and Right- hand side of the vehicle.
This will fit cars which have a Type 42 wheel and an 8 TPI (threads per inch) pattern. This will fit Morgan, Triumph, Bugatti, Ferrari.
It will fit some MG (check for thread pattern? some have 12 TPI), Austin Healey, again some have 12 TPI please check.
Please Check if unsure. CLICK HERE TO ORDER PRODUCT
HUB PULLER 42 TYPE 12 TPI
Type 42 12 TPI (K021/12) – Website Price £136.25 + Shipping +VAT
Universal tool which will serve both Left hand and Right- hand side of the vehicle.
This will fit cars which have a Type 42 wheel and a 12 TPI (threads per inch) pattern. This will fit early MG TC, TA, TB Etc and Early Austin Healey.
Please Check If unsure. CLICK HERE TO ORDER PRODUCT
HUB PULLER 52 TYPE
Type 52 8 TPI (K020) – Website Price £136.25 + Shipping + VAT
Universal tool which will serve both Left hand and Right- hand side of the vehicle. This will fit cars which have a Type 52 wheel and an 8 TPI (threads per inch) pattern. This will fit Jaguar, Old Aston Martin, and Old AC, Jensen and Alvis.
Please check if unsure. CLICK HERE TO ORDER PRODUCT
HUB PULLER 62 TYPE
Type 62 8 TPI (K1644) – Website Price £204.25 + Shipping + VAT
Universal tool which will serve both Left hand and Right hand side of the vehicle.
This will fit cars which have a Type 62 wheel and an 8 TPI ( threads per inch) pattern.
This will fit early Bentley and Rolls Royce, Vauxhall ETC
Please Check if unsure. CLICK HERE TO ORDER PRODUCT
OUR PRODUCTS
BRITISH MADE
Accessories
We also Manufacture a range of Accessories, Hub-Pullers, Spinner Savers, to name a few.
Splined Hubs
Knock Off Spinners
2 eared, 3 eared, Round, Octagonal, plain or logo, we stock and make all types. We can also make bespoke Spinners to your personal requirements
Brakes Discs, Brake Drums, Half Shafts, Wheel Spacers and Stub Axles
Wire Wheels
CUSTOMER FEEDBACK
ENQUIRY FORM
Please ensure you add your contact telephone details as sometimes your email will go into our spam/junk folder and our response can go to your spam/junk folder, we endevour to contact you to ensure you have received our reply.
Address
ORSON EQUIPMENT
Camco House
Dale Street
Bilston
Wolverhampton
WV14 7JY